Sunday, April 20, 2014

BASIC BOXES - SERIES ONE





This is the first in a series of boxes that have been designed as sturdy stand alone containers, insert receptacles for decorative origami wraps, or bases for pretty lids made from a different pattern.





As of today, there are ten different boxes in the Basic Boxes Series.  Each  has a different feature. I will post details of each as I complete the diagramming and instructions.





The first in the series was designed to have very strong ends.












This makes it a good insert for the Crossover Box that I posted about on this blog some time ago.  That decorative wrap requires some downward force on the top during the final part of its construction.  The original box tended to collapse which resulted in a couple of us origami enthusiasts coming up with some modifications to accommodate this.  This is an additional one. 

I will come back to this box in later months as I have designed other variations.




All variations of the box can be squashed flat.  This means that it can be sent through the mail, put in a pocket or transported in a purse or a binder for later reconstruction.



 



The simplest version is made from construction paper (12" x 9" --> 8 x 6 grid) or other material with a 4:3 ratio. This version has a single layer floor.

If you use construction paper I would recommend using high end heavy duty fade resistant alternatives. These fold much better than the cheaper versions.





The more complex versions of the pattern, made from square paper or generic oblongs, have a double layer floor.












Here are the Crease Patterns for the three versions. I recommend making the simple 8 x 6 grid one first as the others require that you pull out the second layer of floor from the side walls, and then lock the model by folding over the end walls underneath this layer.









Full instructions, with copious diagrams and photos, are available for purchase from my ETSY shop. This can be accessed from the Side Bar of this Blog.

Tuesday, March 25, 2014

CHECK HOLDER ENVELOPE OR LETTERFOLD






This item was designed for 24lb American Letter sized paper and meant to hold a standard American sized check.

The pattern can also be used with A4 paper, Construction Paper (typically 9 inches by 12 inches) and sturdy (kraft-based) gift wrap cut to an appropriate size.












The model looks particularly good when folded from Letterhead paper, especially one with a strong border.


 








Here is the Crease Pattern for the back of the model showing how it is folded up around the check/cheque.


 

This is a very easy pattern and is suitable for beginners, just as long as they are comfortable making a couple of "about here" folds when bringing in the side flaps and they can turn back a flap so that the gap between it and the crease it is lined up with is just a little over the thickness of the paper.









Full instructions, diagrams, photos and other images can be purchased at a very reasonable cost from my ETSY shop. See the side bar for a link.

Saturday, March 1, 2014

FULL INSTRUCTIONS FOR MY WALLETS ARE NOW AVAILABLE

Over the years I have had many requests for diagrams and instructions to fold the wallet that is pictured on the Header for this site. Well all that whinging has finally paid off. Yesterday I uploaded PDF instruction files for this Wallet Pouch and the simpler Catera Wallet to my ETSY shop. You can find a link to that shop on the side bar. One of my customers has already succeeded in folding the Catera Wallet and sent this lovely photo. Well done, maohare!